ComPlex Plastics Serving the World

PLEASE TURN OFF POPUP BLOCKER AND ALLOW  POPUPS

TORLON

PolyAmide-Imide

TORLON ^® GRADES
Torlon ^® 4203 Electrical Grade
Torlon ^® 4203 extruded PAI offers excellent compressive strength and the highest elongation of the Torlon ^® grades. It also provides electrical insulation and exceptional impact strength. This grade is commonly used for electrical connectors and insulators due to its high dielectric strength.

Torlon ^® 4301 Bearing Grade
Torlon ^® 4301 extruded PAI is primarily used for wear and friction parts. It offers a very low expansion rate, low coefficient of friction and exhibits little or no slip-stick in use. Torlon ^® 4301's flexural modulus of 1,000,000 psi is higher than most other advanced engineering plastics. This grade excels in severe service wear applications such as non- lubricated bearings, seals, bearing cages and reciprocating compressor parts.

Torlon ^® 5530 Bearing Glass Re-Enforced Grade
Torlon ^® 5530 is 30% glass reinforced, compression molded PAI. It is ideal for higher load structural or electronic applications. This grade is similar in composition to Torlon ^® 5030 PAI (injection molded). It is selected for larger shapes or when the greatest degree of dimensional control is required. Applications include burn-in sockets, gears, valve plates, impellers, rotors, terminal strips, and insulators.

Data Sheet

PRODUCTS  LIST   &  TECHNICAL DATA

Telephone : NORTH AMERICA  1-888-PLASTIK or 1-800-363-2870

Telephone : INTERNATIONAL 001-514-696-6767

 

       FAX :  USA & CANADA (514) 696-2637      

WAREHOUSES IN MAJOR CITIES

Sales & Information :

USA EAST COAST : info@complexplastics.com USA WEST COAST : mike@complexplastics.com

CANADA WEST COAST : bc@complexplastics.com CANADA EAST COAST : sales@complexplastics.com

Europe : europe@complexplastics.com Asia : asia@complexplastics.com     Middle East : MiddleEast@complexplastics.com

          

Languages Spoken : English French German Spanish Russian Bulgarian Hungarian Polish Chinese (Cantonese , Manderin) Japanese

Comments & Suggestions : webmaster@complexplastics.com

Designed By Weblord Inc, (514) 696-2742 © 1996
Last modified: Sunday, April 18, 2010 07:42 AM

DocRef_index.htm_051017__